CHOICE OF METAL SHEET
FOLLOW THE INSTRUCTIONS AND SEND US YOUR REQUEST OF QUOTE FOR THE CUSTOMED METAL SHEET!
HOLE SHAPE
AFTER THE HOLE CHOICE, SPECIFY THE SIZE IN MILLIMETERS
Size of metal sheet 100x200 cm, 0,8 mm thickness in INOX steel AISI 304, ROUND HOLE (diameter 1 mm) will be wrote: 1x2x0,8 A304 RI
Size of metal sheet 125x250 cm, 3 mm thickness in alluminium (league 1050) , SQUARE HOLE 5x5 mm will be wrote: 1,25x2,5x3 ALL C5
Size of metal sheet 100x200 cm, 1,5 mm thickness in iron , HEXAGONAL HOLE 4 mm will be wrote: 1x2x1,5 H4
Size of metal sheet 100x100 cm, 1 mm thickness in galvanized iron, OBLONG HOLE 5x20 mm will be wrote: 1x1x1 ZL R5x20
Size of metal sheet 20x50 cm, 2 mm thickness in corten , RECTANGULAR HOLE 10x35 mm will be wrote: 0,2x0,5x2 CORTEN C10x35
Size of metal sheet 100x150 cm, 1 mm thickness in iron, DIAGONAL SQUARE HOLE 10x10 mm will be wrote: 11x1,5x1 C D10
Size of metal sheet 130x100 cm, 1 mm thickness in steel (AISI 316) , RHOMBUS HOLE 8x10 mm will be wrote: 1x1,5x1 A316 CS8x10
MATERIAL OF THE METAL SHEET
Chose the right material in relation to your needs!
INOX STEEL (AISI 304, 316 AND 430)
Identified with A304, A316 or A430
ALLUMINIUM (LEAGUE 1050)
Identified with ALL
IRON (ORDINARY STEEL) AND GALVANIZED
IRON is not specified. GALVANIZED is identified with Z
CORTEN (SPECIAL MATERIAL)
Identified with CORTEN
Examples:
Size of metal sheet 100x200 cm, 0,8 mm thickness in INOX STEEL (AISI 304) will be wrote: 1x2x0,8 A304
Size of metal sheet 125x250 cm, 3 mm thickness in ALLUMINIUM (LEAGUE 1050) will be wrote: 1,25x2,5x3 ALL
Size of metal sheet 150x300 cm, 1,5 mm thickness inIRON will be wrote: 1,5x3x1,5 FE
Size of metal sheet 100x100 cm, 1 mm thickness in GALVANIZED STEEL will be wrote: 1x1x1 Z
Size of metal sheet 20x50 cm, 2 mm thickness in CORTEN will be wrote: 0,2x0,5x2 CORTEN
SIZE AND THICKNESS OF THE METAL SHEET
The first step to create the code, related to the perfored metal sheet that you are loocking for, is find the size and the thickness.
In this page you are going to find the other directions to complete the code of your metal sheet.
A metal sheet can have lots of different sizes and thicknesses, according to the client needs.
The thickness goes from 0,8 to 1 cm.
There are STANDARD sizes (100x200 cm, 125x250 cm and 150x300 cm) and CUSTOMIZED sizes.
In the code, the sizes, have to be wrote in meters, and the thickness have to be wrote in millimeters.
Examples:
Metal sheet sized 100x100 cm will be wrote 1x1
Metal sheet sized 20x50 cm will be wrote 0,2x0,5
Metal sheet sized 100x200 cm, thickness 0,8 mm will be wrote 1x2x0,8
Metal sheet sized 125x250 cm, thickness 3 mm will be wrote 1,25x2,5x3
Metal sheet sized 150x300 cm, thickness 1,5 mm will be wrote 1,5x3x1,5
HOLES ARRANGEMENT
QUINCUNX (60°): identified with the letter "T" followed by the wheelbase p number. It is the commercial arrangement of the round holes. In that you find equilateral triangles starting from their centers in the vertices.
ALTERNATE TO 45°: identified with the letter "C" followed by the wheelbase p number. (If you have an integer value for c and consequently p would take on a fractional value, it is preferable to indicate the arrangement of the holes with the letter "Z" followed by the number indicating the value of c)
ALTERNATEidentified with the letter "Z" followed by the wheelbase p1 and p2 number. For drilling with R-C-CD-H type holes, the first center distance to indicate is the smaller one. In the case of drilling with CS-LR-LC type holes, the first center distance to indicate is the one measured parallel to the minor axis of the hole (p1).
EQUAL TO 90°: identified with the letter "U" followed by the wheelbase p1 and p2, that, in this disposal, got the same value.
IN LINE: identified with the letter "U" followed by the wheelbase p1 and p2. For drilling with R-C-CD type holes, the first center distance to indicate is the smaller one. In the case of drilling with CS-LR-LC type holes, the first center distance to indicate is the one measured parallel to the minor axis of the hole (p1).
Remember to specify, after the letter of the choosed disposition, the pitch measurement, which is calculated from the center of one hole to the center of the adjacent hole.
English 
Italian